[1] G.S.A. de los Rios, R. Balderas, V.A. Duong, S. Chataigner, J.F. Caron, A. Ehlracher, G. Foret, A. Diaz Diaz, Laminated materials with plastic interfaces: modeling and calculation, Modeling and Simulation in Materials Science and Engineering, Vol. 17, 2009.
[2] S. Chataigner, J.F. Caron, K. Benzarti,  M. Quiertant, C. Aubagnac, « Characterization of composite to concrete bonded interface – Description of the single lap shear test», European Journal of Environmental and Civil Engineering, Vol.13: 1073-1082, 2009.
[3]  S. Chataigner, J.F. Caron, A. Diaz Diaz, C. Aubagnac, K. Benzarti,  Non linear failure criteria for a double lap bonded joint, International Journal of Adhesion and Adhesives, Vol.30(1): 10-20, 2010.
[4] S. Chataigner, V.A. Duong, J.F. Caron, A. Diaz Diaz, Investigation of adhesive’s elasto-plasticity in bonded lap joints: slip and shear strain along the joint, Construction and Building materials, 2010, Vol.25: 432-441, 2011.
[5] S. Chataigner, J.F. Caron, Shear stress transfer optimization in the case of an adhesively bonded joint: use of a curved bonded joint for a structural bonded assembly, Construction and Building materials, Vol.25: 442-451, 2011.
[6] S. Chataigner, J.F. Caron, K. Benzarti, M. Quiertant, C. Aubagnac, Use of a single lap shear test to characterize composite-to-concrete or composite-to-steel bonded interfaces, Construction and Building materials, Vol.25: 468-478, 2011.
[7] K. Benzarti, S. Chataigner, M. Quiertant, C. Marty, C. Aubagnac, Accelerated ageing behaviour of the adhesive bond between concrete specimens and CFRP overlays, Construction and Building materials, Vol.25: 523-538, 2011.
[8] V.A. Duong, A. Diaz Diaz, S. Chataigner, J.F. Caron, A layerwise finite element for multilayers with imperfect interfaces, Composite Structures, Vol. 93 (12): 3262-3271, 2011.
[9] L.M. Mendoza-Navarro, A. Diaz Diaz, J.F. Caron, S. Chataigner, Enhanced layerwise model for laminates with imperfect interfaces – Part 2: Experimental validation and failure prediction, Composite Structures, Vol.94(3): 1032-1037, 2012.
[10] R. Alvarez-Lima, A. Diaz Diaz, J.F. Caron, S. Chataigner, Enhanced layerwise model for laminates with imperfect interfaces – Part 1: Equations and theoretical validation Composite structures, Vol.94(5): 1694-1702, 2012.
[11] N. Houhou, K. Benzarti, M. Quiertant, S. Chataigner, A. Flety, C. Marty, “Analysis of the non-linear creep behaviour of FRP-concrete bonded assemblies”, Journal of Adhesion and Science Technology, Vol.29(14-15): 1345-1366, 2014.
[12] G. Youssef; L. Loulou; S. Chataigner; A. Flety; R. Le Roy; S. Caré; M. Bornert; C. Aubagnac, Analysis of the Behavior of a Bonded Joint between Laminated Wood and Ultra High Performance Fiber Reinforced Concrete using Push-Out Test, Construction and Building Materials, Vol.53: 381-391, 2014.
[13] S. Chataigner, J.L. Saussol, X. Derobert, G. Villain, C. Aubagnac, Temperature influence on electromagnetic measures of concrete humidity, Non destructive testing and engineering international, European Journal of Environmental and Civil Engineering, Vol.19(4):482-495, 2015.
[14] W. Toumi-Ajimi, S. Chataigner, L. Gaillet, Experimental investigations on the influence of temperature on the behavior of steel reinforcement (strands and rebars), Key Engineering Materials, Vol. 771, pp.908-915, 2016.
[15] E. Lepretre, S. Chataigner, L. Dieng, L. Gaillet, H. Cannard, Numerical and experimental investigations of hot driven riveting process on old steel structures, Engineering Structures, Vol.127, pp. 583-593, 2016.
[16] W. Toumi Ajimi, S. Chataigner, Y. Falaise, L. Gaillet, Influence of low elevated temperature on the mechanical behavior of steel rebars and prestressing wires in nuclear containment structures, Construction and Building materials, Vol.134, pp. 462-470, 2017.
[17] L. Dieng, D. Amine, Y. Falaise, S. Chataigner, Parametric study of finite element modeling of shot peening on welded joints, Journal of Constructional Steel Research, Vol.130, pp. 234-247, 2017.
[18] P. Chhun, A. Sellier, L. Buffalo-Lacarrière, S. Chataigner, L. Gaillet, Incremental modelistation of relaxation of prestressing steel wires under variable loading and temperature, Construction and Building Materials, Vol. 163, pp.337-342, 2018.
[19] A. Rolland, M. Quiertant, A. Khadour, S. Chataigner, K. Benzarti, P. Argoul, Experimental investigations on the bond behavior between concrete and FRP reinforcing bars,, Construction and Building materials, Vol.173, pp.136-148, 2018.
[20] E. Lepretre, S. Chataigner, L. Dieng, L. Gaillet, Fatigue strengthening of cracked steel plates with CFRP laminates in the case of old steel materials, Construction and Building Materials, Vol. 174, pp. 421-432, 2018.
[21] S. Chataigner, K. Benzarti, G. Foret, J.F. Caron, G. Gemignani, M. Brugiolo, I. Calderon, I. Pinero, V. Birtel, F. Lehmann, Design and evaluation of an externally bonded CFRP reinforcement for the fatigue reinforcement of old steel structures, Engineering Structures, Vol. 177, pp.556-565, 2018.
[22] A. Orcesi, A. Feraille, S. Chataigner, Fatigue strengthening of steel structures using high modulus CFRP plates: development of a life-cycle analysis approach, Construction and Building Materials, Vol. 227, 2019
[23] F. Lehmann, S. Chataigner, V. Birtel, J. Wang, O. Konrad, Development of a sensor for monitoring mechanically stressed adhesive joints, Construction and Building Materials, Vol. 227, 2019.
[24] E. Djeumen, S. Chataigner, R. Creac’hcadec, Q. Sourisseau, M.O. Quemere, J.P. Court, F. Sayed, Creep investigations on adhesively bonded fasteners developed for offshore steel structures, Marine Structures, Vol.69, 2020.
[25] A. Rolland, P. Argoul, K. Benzarti, M. Quiertant, S. Chataigner, A. Khadour, Analytical and numerical modeling of bond behavior between FRP reinforcing bars and concrete, Construction and Building Materials, Vol. 231, article 117160, 2020
[26] S. Chataigner, M. Wabeh, D. Garcia-Sanchez, K. Benzarti, V. Birtel, M. Fischer, L. Sopena, R. Boundouki, F. Lehmann, E. Martin, G. Gemignani, M. Zalbide, Preventive fatigue strengthening of steel structures with adhesively bonded CFRPs – efficiency demonstration on a real bridge, Journal of Composites for construction, Vol.24 (3), 2020.

[27] E. Lepretre, S. Chataigner, L. Dieng, L. Gaillet, Stress intensity factor assessment for the reinforcement of cracked steel plates using prestressed or non-prestressed adhesively bonded CFRP, Materials, Vol. 14(7), 2021. 
[28] A. Rolland, K. Benzarti, M. Quiertant, S. Chataigner, Accelerated aging behavior in alkaline environments of GFRP reinforcing bars and their bond with concrete, Materials, Vol. 14, 5700, 2021.
[29] C. Sarr, S. Chataigner, L. Gaillet, N. Godin, Nondestructive evaluation of FRP-reinforced structures bonded joints using acousto-ultrasonic: towards diagnostic of damage state, Construction and Building Materials, 313, 125499, 2021.
[30] M. Loiseau, S. Chataigner, R. Creac’hcadec, Q. Sourisseau, M.O. Quemere, J.P. Court, F. Sayed Ahmad, Inverse identification method of adhesive creep properties from real scale investigations on bonded fastener, The Journal of Adhesion, 98(6), 2022.
[31] Q. Sourisseau, E. Lepretre, S. Chataigner, X. Chapeleau, L. Mouton, S. Paboeuf, Use of high spatial resolution optical fibre to monitor crack propagation of an adhesively bonded joint during ENF and DCB tests, International Journal of Adhesion and Adhesives, 115, 2022.
[32] J. Guo, A. Doitrand, C. Sarr, S. Chataigner, L. Gaillet, N. Godin, Numerical voids detection in bonded metal/composite assemblies using acousto-ultrasonic method, Applied Sciences, Applied Sciences, Vol.12(9), 2022.
[33] C. Sarr, S. Chataigner, L. Gaillet, N. Godin, Defects detection and identification in adhesively bonded joints between CFRP laminate and concrete beam using acousto-ultrasonic technique, Journal of Composite Sciences, Vol.6(11), 2022. 
[34] M. Loiseau, S. Chataigner, R. Creac’hcadec, E. Lepretre, M.O. Quemere, J.P. Court, Nonlinear creep behaviour of adhesively bonded fastener in tension – application of an inverse identification method of creep parameters independent of the fastener geometry, Journal of Adhesion Science and Technology, 01694243, 2023.
[35] M. Loiseau, S. Chataigner, R. Creac’hcadec, E. Lepretre, J.P. Court, M.O. Quemere, Development of a creep mechanical test setting based on Arcan geometry, Journal of Testing and Evaluation, Vol.52(1), 2024.
[36] H. Franz, S. Chataigner, M. Rinke, L. Dieng, Assessment of the rotational stiffness of single-riveted joints in a steel lattice girder by modal analysis, Engineering Structures, Vol.298, 117052, 2024. 
[37] H. Franz, M. Rinke, J.L. Martin, S. Chataigner & L. Dieng, French metallic train sheds of 1850 to 1930: structural specificities and the evolution of the restoration practices. International Journal of Architectural Heritage, 2025.
[38] N. Delaplanque, M. Tharreau, S. Chataigner, M. Quiertant, K. Benzarti, L. Battais, A. Rolland, L. Gaillet, X. Bourbon, Durability of partially cured GFRP reinforcing bars in alkaline environment with or without sustained tensile load, Construction and Building Materials, 442, 137603, 2024.
[39] RFID sensor development for corrosion monitoring in bridges cables, L. Gaillet, C. Sarr, Y. Falaise, S. Chataigner, P. Talbot, B. Lescop, S. Rioual, article RFID cheikh, In Press, Nondestructive Testing and Evaluation, 2025. 

 

    [1] S. Chataigner, J.F. Caron, Optimisation du transfert des efforts d’un joint collé – Utilisation d’un joint « courbe » pour un collage structural, Annales du Bâtiments et des Travaux Publics, Vol.1 : 18-28, 2009.
    [2] S. Chataigner, M. Rabasse, K. Benzarti, M. Quiertant, C. Aubagnac, Durabilité des renforcements par collage de matériaux composites des structures en béton, La technique Française du béton, 2010.
    [3] S. Chataigner, A. Gagnon, M. Quiertant, K. Benzarti, C. Aubagnac, Renforcements par composites collés des structures métalliques de génie civil : durabilité du transfert des efforts par collage entre renfort composite et métal, Annales du Bâtiment et des Travaux Publics, Vol.4-5 : 93-99, 2011.
    [4] S. Chataigner, A. Fléty, C. Aubagnac, M. Quiertant, K. Benzarti, Caractérisation mécanique de l’interface collée béton/renfort composite par essai de cisaillement. Revue des composites et des matériaux avancés. Numéro spécial Matériaux composites pour le renforcement des structures de Génie Civil. Volume 22(2) - p. 141-154. 2012.
    [5] S. Chataigner, A. Gagnon, M. Quiertant, K. Benzarti, C. Aubagnac, Durabilité de l’interface collée entre un renfort composite et un support métallique. Revue des composites et des matériaux avancés. Numéro spécial Matériaux composites pour le renforcement des structures de Génie Civil. Volume 22(2) - p. 155-170. 2012.
    [6] S. Chataigner, C. Aubagnac, J.F. Caron, Conception d'un ancrage par collage optimisé - Utilisation de la dépendance du comportement de l'adhésif vis-à-vis de la pression hydrostatique. Revue des composites et des matériaux avancés. Numéro spécial Matériaux composites pour le renforcement des structures de Génie Civil. Volume 22(2) - p. 219-236. 2012.
    [7] V. Perier, S. Chataigner, A. Pruvost, Comparaison de différentes armatures utilisées pour le renforcement du béton, BOA du LCPC, 280-281, pp.51-62, 2013.
    [8] J.F. Caron, V.A. Duong, A. Diaz Diaz, S. Chataigner, A. Lerpinière. Une approche de type layer-wise pour la modélisation de joint de colle élastoplastique. Revue des composites et des matériaux avancés. Volume 24(4) - p. 413-423. 2014.
    [9] N. Houhou, K. Benzarti, M. Quiertant, S. Chataigner, G. Youssef, C. Aubagnac, M. Rabasse, A. Flety, Fluage des interfaces collées béton/composite couplé à un vieillissement hygrothermique : Études expérimentales et analytiques - Creep of bonded concrete/composite interfaces coupled with hygrothermal ageing: Experimental and analytical investigations, Annales du Bâtiment et des Travaux Publics, Vol. 6 : 54-70. 2014.
    [10] A. Rolland, K. Benzarti, M. Quiertant, P. Argoul, A. Khadour, S. Chataigner. Caractérisation d’armatures en matériaux composites pour le renforcement de structures et comportement mécanique de l’interface armature/béton. BOA du LCPC, 71, 2015.
    [11] S. Chataigner, L. Dieng, Y. Falaise, M. Grasset, Evaluation des contraintes résiduelles dans les assemblages soudés et amélioration de leur durée de vie par techniques de parachèvement, Annales du Bâtiment et des Travaux Publics, 5, 2015.
    [12] C. Aubagnac, D. Germain, A. Houel, R. Sadone, J.P. Maherault, J.J. Brioist, C. Marcotte, S. Chataigner, A. Khadour, M. Quiertant, Présentation des premiers résultats de l’expérimentation de la poutre du VIPP de Clerval, Annales du Bâtiment et des Travaux Publics, 2016.
    [13] S. Chataigner, E. Lepretre, L. Gaillet, L. Dieng, Utilisation des renforcements par composites collés pour l’augmentation de la durée de vie des structures métalliques, Annales du BTP, Vol.69, N°4, 2017

[14] S. Chataigner, L. Michel, K. Benzarti, E. Ferrier, E. Ghorbel, P. Jandin, A. Pruvost, M. Quiertant, A. Rolland, Use of FRP rebars in reinforced concrete structures: an overview of the French guidelines, JEC Composites Magazine, n°157, 2024.
[15] S. Paboeuf, M. Deydier, S. Chataigner, E. Lepretre, Q. Sourisseau, Determining steel/composite failure load of bonded repair assemblies, Composites World, Vol.11, 2025.

[1] S. Chataigner, J.F. Caron, C. Aubagnac, K. Benzarti, « Détermination d’un critère de rupture dans le cas d’un collage de plats pultrudés à fibres de verre », Journées Sciences de l’Ingénieur du LCPC, Marne-La-Vallée, 5-6 Décembre 2006.
[2] S. Chataigner, J.F. Caron, C. Aubagnac, « Conception et Dimensionnement d’un ancrage de hauban plat en composite », 15ème Journées Nationales sur les Composites, Marseille, 6-8 Juin 2007.
[3] S. Chataigner, J.F. Caron, M. Quiertant, C. Aubagnac, « FRP to concrete or steel bonded joints: Use of the bilinear cohesive zone model to characterize the anchorage zone”, Conference on Composites in Civil Engineering, CCC2008, Porto, Avril 2008.
[4] S. Chataigner, J.F. Caron, C. Aubagnac, « Design of a bonded anchorage for composite plates: Influence of the adhesive plasticity”, European Conference on Composite Materials, ECCM 13, Stockholm, Juin 2008.
[5] S. Chataigner, J.F. Caron, M. Quiertant, K. Benzarti, C. Aubagnac, « Characterization of composite to concrete interface: Use of the cohesive zone approach”, Fourth International Conference on FRP Composites in Civil Engineering, CICE 2008, Zurich, Juillet 2008.
[6] S. Chataigner, J.F. Caron, K. Benzarti, M. Quiertant, C. Aubagnac, « Characterization of composite to concrete bonded interface: Description of the single lap shear test”, Orgagec 2008, Marne La Vallée, Août 2008.
[7] K. Benzarti, M. Quiertant, C. Aubagnac, S.Chataigner, I. Nishizaki, Y. Kato, « Durability of CFRP strengthened concrete structures under accelerated or environmental ageing conditions”, 2nd International Conference on Concrete Repair Rehabilitation and Retrofitting, ICCRRR2008,  Cape Town, South Africa, 24-26 Novembre 2008.
[8] K. Benzarti, M. Quiertant, C. Aubagnac, S.Chataigner, I. Nishizaki, Y. Kato, « Comparative French and Japanese studies on the durability of CFRP strengthened concrete structures”, 11th Japanese-European Symposium on Composite materials, EJS11, Porto, Portugal, 9-11 Septembre 2008.
[9] S. Chataigner, J.F. Caron, C. Aubagnac, « Optimisation du transfert des efforts d’un joint collé – Utilisation d’un joint courbe », AUGC 2009, St Malo, 3-5 Juin 2009.
[10] S. Chataigner, « Conception et dimensionnement d’un ancrage de hauban plat en matériaux composites», AUGC 2009, St Malo, 3-5 Juin 2009.
[11] S. Chataigner, J.F. Caron, C. Aubagnac, « Utilisation de la dépendance du comportement de l’adhésif vis-à-vis de la pression hydrostatique pour optimiser la capacité des joints collés», 16ème Journées Nationales sur les Composites, Toulouse, 10-12 Juin 2009.
[12] K. Benzarti, S. Chataigner, M. Quiertant, C. Aubagnac, Durability of the composite/concrete adhesive bond under accelerated ageing, International Congress on Composite Materials ICCM17, Edinburgh, Scotland, 27-31 Juillet 2009.
[13] S. Chataigner, M. Rabasse, K. Benzarti, M. Quiertant, C. Aubagnac, Durability of adhesively bonded composite reinforcements for concrete structures, Fib2010, Washington, USA, 31 Mai-4 Juin 2010.
[14] R. Sadone, M. Quiertant, S. Chataigner, J. Mercier, E. Ferrier, Behavior of an innovative end-anchored externally bonded CFRP strengthening system under low cycle loading, 5th International Conference on FRP Composites In Civil Engineering CICE 2010, Beijing, China, 27-29 September 2010.
[15] K. Benzarty, M. Quiertant, C. Marty, S. Chataigner, C. Aubagnac, Effects of accelerated ageing on the adhesive bond between concrete specimens and external CFRP reinforcements, 5th International Conference on FRP Composites In Civil Engineering CICE 2010, Beijing, China, 27-29 September 2010.
[16] S. Chataigner, A. Flety, C. Aubagnac, L. Loulou, S. Caré, R. Le Roy, Transfert des efforts par collage structural entre bois et béton : Utilisation d’un essai Push-Out pour le choix de l’adhésif, GC 2011, Paris, 22-23 Mars 2011.
[17] L. Loulou, S. Caré, R. Le Roy, M.Bornert, F.Bertrand, N.Boumedienne, S. Chataigner, Etude de la durabilité des assemblages collés bois-béton soumis à des chargements hydriques, CFM, Besançon, 2011.
[18] K. Benzarti, F. Freddi, G. Ruocci, M. Quiertant, S. Chataigner, Ageing effects on the debonding behaviour of FRP reinforcements : Experiments and damage modeling, CDCC, Quebec , 2011.
[19] N. Houhou, K. Benzarti, M. Quiertant, S. Chataigner, A. Fléty, C. Marty. Analysis of the creep behaviour of FRP-concrete bonded assemblies. The International Conference on Adhesive Bonding (AB2011). 7-8 July, 2011, Faculty of Engineering University of Porto, Porto, Portugal.
[20] N. Houhou, M. Quiertant, K. Benzarti, S. Chataigner, M. Rabasse, A. Flety, Innovative experimental device for the creep characterization of the concrete/FRP adhesive bond, CICE 2012, Rome.
[21] S. Chataigner, A. Gagnon, M. Quiertant, K. Benzarti, C. Aubagnac, Adhesively bonded composite reinforcements for steel structures : durability of the stress transfer, CICE 2012, Rome.
[22] R. Sadone, M. Quiertant, E. Ferrier, S. Chataigner, J. Mercier, Anchoring FRP laminates for the seismic strengthening of RC columns, ICCRRR 2012.
[23] G. Youssef, L. Loulou, S. Chataigner, A. Flety, C. Aubagnac, S. Care, R. Le Roy, Force transfer using structural adhesive bonding between timber and UHPFRC: a push-out test to choose the adhesive, ASEA-SEC, Perth, Nov 28-Dec 2, 2012.
[24] Chataigner S., Dieng L., Guiot K., Grasset M., Improving welded joint fatigue life using shot peening or grinding, TRB 2013, Washington, 2013.
[25] Perier V., Chataigner S., Pruvost A., Comparaison de différentes armatures utilisées pour le renforcement du béton, GC 2013, Paris, 2013.
[26] Houhou N., Benzarti K., Quiertant M., Chataigner S., Youssef G., Aubagnac C., Rabasse M., Flety A., Etude du fluage des interfaces collées (béton/composite) couplé à un vieillissement hygrothermique, JNC 18, Nantes, 2013.
[27] Houhou N., Benzarti K., Quiertant M., Marty C., Chataigner S., Influence des charges minérales sur les propriétés viscoélastiques et le comportement en fluage d’adhésifs utilisés en construction, JNC 18, Nantes, 2013
[28] Chataigner S., Rolland A., Benzarti K., Dieng L ., Bouidarene O. Paul J.M., Quiertant M., Argoul P., Collet P., Caractérisation d’armatures en PRF d’aramide utilisées dans les structures en béton armé, JNC 18, Nantes, 2013.
[29] Rolland A., Chataigner S., Benzarti K., Dieng L., Bouidarene O., Paul J.M., Quiertant M., Collet P., Low temperature behavior of concrete with braided aramid fiber bars, FRPRCS, Guimaraes, 2013.
[30] Houhou N., Benzarti K., Quiertant M., Chataigner S., Comportement en fluage des interfaces collées béton/composites : Etude expérimentale et développement d’un modèle analytique, CFM, Bordeaux, 2013.
[31] S. Chataigner, J.F. Caron, H. Chafi, G. Foret, Optimisation du comportement des assemblages collés en utilisant une géométrie courbe, JST AMAC Assemblages des structures composite, Bordeaux, 2013.
[32] Houhou N., Benzarti K., Quiertant M., Chataigner S., Youssef G., Rabasse M., Aubagnac C., Gagnon A., Flety A., Durability of concrete/FRP bonded assemblies subjected to hydrothermal coupled creep ageing mechanisms : experimental and numerical investigations, TRA 2014, Paris La Défense.
[33] Rolland A., Chataigner S., Benzarti K ., Quiertant M., Argoul P., Paul J.M., Mechanical behavior of aramid fiber reinforced polymer (AFRP) rebar/concrete interfaces, TRA 2014, Paris La Défense.
[34] Rolland A., Chataigner S., Benzarti K., Quiertant M., Argoul P., Durability of GFRP rebars and concrete/GFRP interfaces exposed to accelerated ageing conditions in alkaline environments, CICE 2014, Vancouver, 2014.
[35] Chafi H., Foret G., Chataigner S., Caron J.F., Geara F., Use of a curved adhesively bonded anchorage for a pultruded composite cable, CICE 2014, Vancouver, 2014.
[36] K. Benzarti, N. Houhou, M. Quiertant, S. Chataigner, Creep behaviour of cold-curing epoxy adhesives: analysis and predictive approach, CICE 2014, Vancouver, 2014.
[37] E. Lepretre, S. Chataigner, L. Dieng, L. Gaillet, Understanding the fatigue behaviour of riveted joints: modelling of the hot-riveted process, Eurosteel, Naples, 2014.
[38] V. Bernoala, L. Dieng, S. Chataigner, Y. Falaise, Improvements of welded joints using shotpeening: modelling of the welding process to determine the initial residual stresses, Eurosteel, Naples, 2014.
[39] C. Aubagnac, D. Germain, A. Houel, R. Sadone, J.P. Maherault, J.J. Brioist, C. Marcotte, S. Chataigner, A. Khadour, M. Quiertant, Présentation des premiers résultats de la poutre du VIPP de Clerval, GC 2015, Paris, 2015.
[40] S. Chataigner, L. Dieng, Y. Falaise, M. Grasset, Evaluation des contraintes résiduelles dans les assemblages soudés et amélioration de leur durée de vie par techniques de parachèvement, GC 2015, Paris, 2015.
[41] S. Chataigner, L. Gaillet, L. Vallée, E. Le Gal La Salle, Contrôle non destructif d’assemblages composite/béton collés par acousto-ultrasons, JNC 2015, Villeurbanne, 2015.
[42] A. Rolland, S. Chataigner, M. Quiertant, K. Benzarti, P. Argoul, Durability of GFRP reinforcing bars and their bond in concrete, ICCE 23, Chengdu, Chine, 2015.
[43] A. Houel, C. Aubagnac, D. Germain, J.P. Maherault, J.J. Brioist, S. Chataigner, A. Khadour, M. Quiertant, Instrumentations traditionnelles et innovantes d’un essai de flexion à rupture sur une poutre précontrainte de pont, Colloque C2I, St Nazaire, 2016.
[44] E. Lepretre, S. Chataigner, L. Dieng, L. Gaillet, Reinforcement of a cracked steel plate using CFRP bonding, MCD, Nantes, 2016.
[45] H. Mouzannar, M. Bost, P. Joffrin, C. Pruvost, F. Rojat, J. Blache, A. Houel, M. Valade, A. Khadour, S. Chataigner, L. Gaillet, J.F. David, Y. Falaise, M. Quiertant, Instrumentation of large scale direct shear test to study the progressive failure of concrete/rock interface, MCD, Nantes, 2016.
[46] A. Houel, D. Germain, R. Sadone, C. Aubagnac, J.P. Maherault, J.J. Brioist, S. Chataigner, A. Khadour, M. Quiertant, Résultats et enseignements d’essais de flexion à rupture d’une poutre de précontrainte (VIPP) renforcée par matériaux composites, Diagnobéton, Marrakech, 2016.
[47] S. Chataigner, K. Benzarti, M. Quiertant, G. Foret, J.F. Caron, A. Feraille, A. Orcesi, J. Murcia-Delso, M. Zalbide, C. Schulte, M. Maier, V. Birtel, F. Lehmann, G. Gemignani, R. Boundouki, M. Wahbeh, L. Sopena, E. Martin, C. Iborra, Presentation of FASSTBridge project in the framework of INFRAVATION ERA-NET program, COST TU 1207 meeting, Lodz, 2016.
[48] E. Lepretre, S. Chataigner, L. Dieng, L. Gaillet, A. Gagnon, J. Roth, C. LeRoy, Experimental Characterization of different adhesively bonded composite reinforcement processes for old steel structures, Structural Faults and Repair, Edinburgh, 2016.
[49] S. Chataigner, J. Murcia-Delso, C.J . Schulte, Presentation of the FASSTbridge project : FAST and effective Solution for STeel bridges life-time extension, Structural Faults and Repair, Edinburdh, 2016.
[50] M. Denecker, L. Gaillet, S. Chataigner, J.F. David, R. Michel, Y. Falaise, Corrosion and fatigue health monitoring systems appraisal for offshore steel structures, EWSHM, Bilbao, 2016.  (NDT.net issue Vol.21 No.08 (Aug 2016) ISSN 1435-4934.)
[51] W. Toumi-Ajimi, S. Chataigner, L. Gaillet, Experimental investigations on the influence of temperature on the behavior of steel reinforcement (strands and rebars), CONSEC 2016, Lecco.
[52] W. Toumi-Ajimi, S. Chataigner, L. Gaillet, Influence of temperature on the behavior of steel reinforcement in prestressed concrete nuclear containment structures, TINCE 2016, Paris.
[53] E. Lepretre, S. Chataigner, L. Dieng, L. Gaillet, Reinforcement of old steel structures by CFRP bonding, modified mode I stress intensity factor, CICE 2016, Hong Kong.
[54] S. Chataigner, I. Calderon, C. Schulte, Presentation of the FASSTbridge project: FASt and effective Solution for Steel bridges life-time extension, CICE 2016, Hong Kong.
[55] S. Chataigner, E. Lepretre, L. Gaillet, L. Dieng, Utilisation des renforcements par composites collés pour l’augmentation de la durée de vie des structures métalliques, GC 2017, Mars 2017, Cachan.
[56] E. Lepretre, S. Chataigner, L. Dieng, L. Gaillet, Adhesively bonded composite reinforcement against fatigue crack propagation in the case of old steel structures, Cost action TU 1207 final meeting, Budapest, 2017.
[57] E. Lepretre, S. Chataigner, L. Dieng, L. Gaillet, Renforcement de structures métalliques anciennes fissurées par collage de PRFC, JNC 20, Juin 2017, Marne La Vallée.
[58] S. Chataigner, K. Benzarti, Caractérisation d’un système de renforcement par composites collés de structures métalliques vis-à-vis de la fatigue développé dans le cadre du projet Européen FASSTbridge, JNC 20, Juin 2017, Marne La Vallée.
[59] K. Benzarti, S. Chataigner, Characterization of an adhesively bonded composite reinforcement system used against fatigue of steel structures and developed in the European project FASSTbridge, CDCC 2017, July 2017, Sherbrooke, Canada.
[60] E. Lepretre, S. Chataigner, L. Dieng, L. Gaillet, Crack-reinforcement of old steel structures using adhesively bonded composite, SMAR2017, Zurich, Switzerland.
[61] S. Chataigner, K. Benzarti, G. Gemignani, I. Calderon, I. Pinero, V. Birtel, F. Lehmann, Experimental evaluation of the developed reinforcement system in FASSTbridge project, SMAR2017, Zurich, Switzerland.
[62] S. Chataigner, L. Gaillet, Y. Falaise, J.F. David, R. Michel, C. Aubagnac, A. Houel, D. Germain, J.P. Maherault, Acoustic monitoring of a prestressed concrete beam reinforced by adhesively bonded composite, SMAR2017, Zurich, Switzerland.
[63] M. Wabeh, R. Boundouki, C. Schulte, S. Chataigner, D. Garcia, I. Calderon, G. Demignani, E. Martin, L. Sopena, V. Birtel, FASSTBridge methodology and strengthening system, TRA, Vienna, Austria, 2018.
[64] D. Garcia-Sanchez, M. Wabeh, F. Lehmann, S. Chataigner, L. Sopena, V. Birtel, FASSTBridge methodology and strengthening system: the Jarama bridge experience, CICE 2018, Paris.
[65] E. Lepretre, F. Chemin, S. Chataigner, L. Dieng, L. Gaillet, Proposal of a methodology based on finite element analyses for the design of bonded CFRP reinforcement of steel cracked elements, CICE 2018, Paris.
[66] S. Chataigner, K. Benzarti, G. Foret, J.F. Caron, G. Gemignani, M. Brugiolo, V. Birtel, F. Lehmann, I. Calderon, I. Piniero, Definition and assessment of an adhesively bonded composite reinforcement in fatigue for steel structures developed in FASSTBridge project, CICE 2018, Paris.
[67] A. Orcesi, A. Feraille, S. Chataigner, A life cycle analysis approach applied to the strengthening of steel bridges, CICE 2018, Paris.
[68] M. Wahbeh, R. Boundouki, M. Weidemueller, S. Chataigner, E. Martin, L. Sopena, Increasing the remaining fatigue service life of steel structures using adhesively bonded composites – Design approach developed in FASSTbridge, CICE 2018, Paris.
[69] F. Lehmann, V. Birtel, J. Wang, S. Chataigner, O. Konrad, Development of  sensor for monitoring mechanically stressed adhesive joints, CICE 2018, Paris.
[70] A. Rolland, K. Benzarti, M. Quiertant, P. Argoul, S. Chataigner, A. Khadour, Experimental investigations on the local bond behavior between concrete and FRP rebars using the distributed optical fiber sensors, CICE 2018, Paris.
[71] C. LeRoy, C. Aubagnac, A. Flety, S. Chataigner, K. Benzarti, M. Quiertant, Mobile device to perform a single lap shear test on FRP bonded on a concrete real structure, CICE 2018, Paris.
[72] A. Orcesi, A. Feraille, S. Chataigner, A life cycle analysis approach applied to the strengthening of the Jarama steel bridge, IABSE 2018, Nantes.
[73] S. Chataigner, K. Benzarti, M. Zalbide, I. Calderon, I. Pinero, D. Garcia, G. Gemignani, V. Birtel, F. Lehmann, M. Wabeh, R. Boundouki, E. Martin, L. Sopena, M. Ficher, M. Weidemueller, C. Iborra, Development and application of FASSTbridge solution to Jarama bridge (Fast and effective solution for steel bridges lifetime extension), IABSE 2018, Nantes.
[74] S. Chataigner, L. Gaillet, Y. Falaise, J.F. David, R. Michel, C. Aubagnac, A. Houel, D. Germain, J.P. Maherault, Acoustic monitoring of a prestressed concrete beam reinforced by adhesively bonded composite, ICCRRR 2018, Cape Town, South Africa.
[75] C. Sarr, S. Chataigner, L. Gaillet, N. Godin, Auscultation des assemblages collés par acousto-ultrasons: application à des assemblages acier-composite du génie civil, JNC 2019, Bordeaux.
[76] E. Djeumen, Q. Sourisseau, S. Chataigner, R. Creac’hcadec, M.O. Quemere, J.P. Court, F. Sayed Ahmad, Creep investigations on steel fasteners adhesively bonded to steel plates, CFM 2019, Brest.

[77] M. Loiseau, S. Chataigner, R. Creac’hcadec, M.O. Quemere, J.P. Court, Développement et caractérisation de connecteurs collés pour l’augmentation de la durée de vie des structures métalliques, GC 2021.
[78] F. Soleilhet, N. Houhou, K. Benzarti, S. Chataigner, M. Quiertant, Experimental analysis and modeling of nonlinear shear creep behaviour at the concrete-FRP interface, ACMBS 2020, Sherbrooke, Canada. 
[79] K. Benzarti, S. Chataigner, M. Wabeh, R. Boundouki, E. Martin, L. Sopena, M. Zalbide, D. Garcia-Sanchez, V. Birtel, F. Lehmann, G. Gemignani, Preventive fatigue strengthening of steel structures with bonded CFRPs – efficiency demonstration on a rela bridge, ACMBS 2020, Sherbrooke, Canada. 
[80] M. Loiseau, S. Chataigner, R. Creac’hcadec, Q. Sourisseau, M.O. Quemere, J.P. Court, F. Sayed Ahmad, Determination of creep behaviour of adhesively bonded assembly – application to adhesively bonded steel fasteners, CICE 2021, Istanbul, Turkey. 
[81] C. Sarr, S. Chataigner, L. Gaillet, N. Godin, Assessment of steel-composite and concrete-composite adhesively bonded joints by acousto-ultrasonic technique, CICE 2021, Istanbul, Turkey. 
[82] Q. Sourisseau, E. Lepretre, S. Chataigner, X. Chapeleau, L. Mouton, S. Paboeuf, Use of a distributed optical fiber to monitor the crack propagation of an adhesively bonded joint during an ENF test, CICE 2021, Istanbul, Turkey.
[83] Q. Sourisseau, E. Lepretre, S. Chataigner, X. Chapeleau, L. Mouton, S. Paboeuf, Adhesively bonded FRP reinforcement of steel structures : surface preparation analysis and influence of the primer, OMAE 2022, Hamburg, Germany. 
[84] M. Loiseau, S. Chataigner, R. Creac’hcadec, E. Lepretre, M.O. Quemere, J.P. Court, Development of a mechanical frame adapted to Arcan tests to identify the creep behaviour of adhesive joints, CFM 2022, Nantes.
[85] Q. Sourisseau, E. Lepretre, S. Chataigner, X. Chapeleau, M. Deydier, S. Paboeuf, Suivi de la propagation de fissure par fibre optique “continue” dans des joints collés lors d’essais MMB, CFM 2022, Nantes. 
[86] C. Sarr, S. Chataigner, L. Gaillet, A. Doitrand, N. Godin, Auscultation de renfort de composite collé sur structure métallique par acousto-ultrasons : approche par la modélisation, CFM 2022, Nantes.
[87] N. Delaplanque, S. Chataigner, L. Gaillet, M. Quiertant, K. Benzarti, A. Rolland, D. Bigaud, A. Savaria Flores, Durabilité des armatures PRF soumises à un vieillissement sous charge, CFM 2022, Nantes. 
[88] H. Franz, E. Lepretre, M. Rinke, S. Chataigner, & L. Dieng, L., Influence de la raideur des assemblages rivetés d’une poutre treillis sur son comportement vibratoire, CFM 2022, Nantes. 
[89] M. Loiseau, S. Chataigner, R. Creac’hcadec, E. Lepretre, M.O. Quemere, J.P. Court, Modelling of the creep behaviour of adhesive joints using arcan tests, Adhesion, Glasgow, 2022.
[90] N. Delaplanque, S. Chataigner, L. Gaillet, M. Quiertant, K. Benzarti, A. Rolland, X. Chapeleau, A. Saravia Flores, Durability in alkaline environment of a fiber optic sensor bonded at the surface of reinforcing rebars for distributed strain measurements in concrete structures, EWSHM 2022, Palerme, Italy. 
[91] Q. Sourisseau, M. Deydier, S. Paboeuf, E. Lepretre, S. Chataigner, X. Chapeleau, Development of composite patch for offshore steel repair, Conference on Durability, Repair and Maintenance of Structures, Porto, 2023. 
[92] N. Delaplanque, S. Chataigner, L. Gaillet, M. Quiertant, K. Benzarti, A. Rolland, A. Saravia Flores, D. Bigaud, Etude de la durabilité des armatures PRF et de l’influence d’une charge appliquée durant le vieillissement sur les cinétiques de dégradation, Congrès Français du Génie Civil, Gif sur Yvette, 2023. 
[93] S. Chataigner, L. Michel, K. Benzarti, E. Ferrier, E. Ghorbel, P. Jandin, A. Pruvost, M. Quiertant, A. Rolland, Utilisation d’armatures composites pour le béton armé: presentation du guide de recommandations de l’AFGC, CFGC, Gif sur Yvette, 2023.
[94] Q. Sourisseau, E. Lepretre, S. Chataigner, X. Chapeleau, M. Deydier, S. Paboeuf, Assessment methodology of a bonded composite repair for offshore structures, CICE 2023, Rio de Janeiro, 2023.
[95] S. Chataigner, L. Michel, K. Benzarti, E. Ferrier, E. Ghorbel, P. Jandin, A. Pruvost, M. Quiertant, A. Rolland, Use of FRP rebars in reinforced concrete structures: an overview of 2021 French guidelines, CICE 2023, Rio de Janeiro, 2023.
[96] N. Delaplanque, S. Chataigner, L. Gaillet, X. Bourbon, M. Quiertant, K. Benzarti, A. Rolland, D. Bigaud, Durability of FRP reinforcing bars exposed to an alkaline environment with/without additional sustained load, CICE 2023, Rio de Janeiro, 2023.
[97] Q. Sourisseau, E. Lepretre, S. Chataigner, X. Chapeleau, M. Deydier, S. Paboeuf, Développement d’une méthodologie d’évaluation d’une réparation en composite collé pour structures offshore, JNC 2023, Besançon, 2023.
[98] Franz, H., Martin, J.-L., Rinke, M., Chataigner, S., & Dieng, L. (2023). Quelle résistance de calcul pour le fer puddlé et l'acier doux ? L'exemple des halles de gare du 19ème et début du 20ème siècle. In M. Gasnier (Éd.), Transitions, patrimoines et matériaux anciens : Patrimoine industriel et ferroviaire (p. 227‑253). Belfort: Les Editions du Lion.
[99] N. Delaplanque, S. Chataigner, L. Gaillet, M. Quiertant, K. Benzarti, A. Rolland, X. Bourbon, D. Bigaud, Etude expérimentale de l’influence de la sollicitation mécanique sur la cinétique de dégradation des armatures PRF, JNB 2023, Hammamet, Tunisie, 2023.
[100] S. Paboeuf, M. Deydier, Q. Sourisseau, E. Lepretre, S. Chataigner, X. Chapeleau, Static and fatigue strength assessment of composite repair, OMAE, Singapour, 2024.
[101] A. Fawaz, E. Lepretre, X. Chapeleau, S. Chataigner, Moisture absorption comparison between bulk adhesives and adhesively bonded joints in different environments, ECCM conference 2024, Nantes, France, 2024.
[102] A. Fawaz, E. Lepretre, X. Chapeleau, S. Chataigner, Development and Validation of a Creep Frame Adapted for ELS (End Load Split) Test, SMAR conference 2024, Salerno, Italy, 2024. 
[103] N. Delaplanque, S. Chataigner, M. Quiertant, K. Benzarti, A. Rolland, X. Bourbon, X. Chapeleau, L. Battais, L. Gaillet, Investigations on the ageing of GFRP rebar-concrete bond under sustained load for a high strength concrete, SMAR conference 2024, Salerno, Italy, 2024.
[104] Q. Sourisseau, E. Lepretre, X. Chapeleau, S. Chataigner, S. Paboeuf, M. Deydier, Use of equivalent interface samples during fracture mechanics investigations for the design of adhesively bonded composite reinforcements on steel structures, SMAR conference 2024, Salerno, Italy, 2024.